Water connection kit Dreame for models X50 Ultra, L50 Ultra, L50 Pro Ultra, RAW7

The Dreame water connection kit provides automatic fresh water refilling and dirty water draining, significantly reducing the need for manual maintenance. This solution allows the robot to operate fully autonomously, providing more free time and higher cleaning efficiency. The kit includes a high-quality 3-way switching valve (G3/8). Main features:

Automatic water filling and draining — safe and fully automated operation.

Water level sensor — stops the water supply when the tank is full, preventing overflow.

Clogging protection — the dirty water filter prevents pipe blockages.

Continuous dirty water drainage — maintains fresh airflow and prevents odors.

Installation
Dreame recommends contacting a professional plumber to perform the connection correctly. Video instructions.
The kit includes a 3-way switching valve G3/8. If the size does not fit, a suitable adapter is required.
Check the water pressure with a manometer — it must be within 0.14–1 MPa (21–145 psi, 1.4–10 bar).
Before installation, shut off the home’s main water supply and completely drain the system.
The water connection kit may only be connected to a cold water supply.
During installation, disconnect the robot from the base station.
Choose a location protected from direct sunlight and precipitation.
Place the base station up to 1.5 m from the water connection and sewer outlet.
Distance between the sides of the base station and the wall — at least 0.5 m on the sides and 1.5 m in front.
If necessary, use a door threshold ramp for places with a height of 2–3.5 cm.
Make sure the base station has a stable and strong 2.4 GHz Wi‑Fi signal.